Plastic assembly
I started with the real re-assembly today. First up was the plastic around the Vault.
The plastic piece on the vault holding the lamps is normally white on one side and black on the other, which I don’t like. So I decided to cover it with the stone pattern. Spraying it (like I have done the bookcase base) would be too much effort for the reward (the plastic is not too obvious) so I tried to use a water slide decal. Unfortunately the decal wouldn’t stay on the plastic properly, so I used adhesive paper instead:
Vault plastic with stone pattern
In assembling the entire Vault plastic the only other addition I made was to use black tubing for the wires in order to better hide the wires:
Fully assembled Vault plastic from right
Vault plastic from left showing wire covering