Strobe PCB and bulb
As reported in an earlier post (https://taf.gozzled.com/?p=1814) one fault originally with the pinball machine was that the strobe wasn’t working. As is common on an AFM, the legs of the Trigger Coil (which are very thin) had broken off. Instead of repairing this coil I bought a new one from a local electronics store (Conrad) and fitted it. And while I was as it, I replaced the strobe bulb also, which came from the same store. I didn’t know if this was necessary or not, but as the bulbs have a limited lifetime, I thought it couldn’t do any harm:
Completed strobe board and bulb