The Addams Family Pinball

It was a slow and laborious process stripping down (shopping) the pinball machine today. My process consisted of

1. Taking a photo of the part to be disassembled
2. Disassembling the part
3. Laying the disassembled pieces on the playfield in their original position (approximately)
4. Taking a photo
5. Moving the parts to my graduated background
6. Taking a photo
7. Separating the nuts, screws, washers and pillars which need to be cleaned in the tumbler
8. Putting the remaining pieces in a plastic cup.

Sample photo of right side plastics broken down

Now this wasn’t a quick process and after 8.5 hours I had got this far:

Halfway into the strip down

I’ll hopefully finish this tomorrow

This entry was posted on Sunday, August 2nd, 2009 at 23h11 and is filed under TAF. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.