Rebuild start – Targets

I started with the rebuild today and first-up were the targets.

I first removed the old foam from between the target and its metal support with a sharp knife, making sure that I removed all of the old adhesive also, cleaned up the metal support and cleaned and adjusted the switch contacts. Finally, I cleaned the target faces with Novus 2.

I then applied the new foam pieces which I had bought over a year ago, making sure everything aligned correctly.

Cleaned targets with nice new foam

Finally I replaced the broken “Bear target” with a nice new one.

New bear target (that's not my foam alignment)

Leave a Reply

You must be logged in to post a comment.